<% dim ModuleName,InfoID,ChannelShortName,CorrelativeArticle,InstallDir,ChannelDir,Keyword,PageTitle,ArticleIntro,Articlecontent Keyword=stripHTML("Cisco 2960,交换机密码") PageTitle=stripHTML("恢复Cisco 2960交换机密码") ArticleIntro=stripHTML("") Articlecontent=stripHTML("重启交换机,按住mode键。  flash_init  switch: dir flash:  switch: rename flash:config.text…") ModuleName = stripHTML("netadmin") InfoID = stripHTML("117455") ChannelShortName=stripHTML("网管") InstallDir=stripHTML("http://www.77169.com/") ChannelDir=stripHTML("netadmin") %> 恢复Cisco 2960交换机密码 - 华盟网 - http://www.77169.com
您现在的位置: 华盟网 >> 网管 >> Cisco >> 正文

恢复Cisco 2960交换机密码

2015/1/15 作者:不详 来源: 华盟收集
导读 <% if len(ArticleIntro)<3 then Response.Write Articlecontent 'Response.Write "Articlecontent" else Response.Write ArticleIntro 'Response.Write "ArticleIntro" end if %>

  重启交换机,按住mode键。

  flash_init

  switch: dir flash:

  switch: rename flash:config.text flash:config.old

  switch: boot

  Would you like to enter the initial configuration dialog? [yes/no]: no

  Switch>en

  Switch#rename flash:config.old flash:config.text

  Destination filename [config.text]?

  Switch#copy flash:config.text system:running-config

  Destination filename [running-config]?

  修改telnet和console密码

  至此密码恢复完成,reload验证一下即可。



  • 上一篇网管:

  • 下一篇网管: